FAST-CAL: INDUSTRIAL TEMPERATURE CALIBRATORS
Fast-Cal – the product range you designed !
During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, are: Rugged, Lightweight, Easy to use on site, Low cost/high benefit ratio, Fast response, high stability, Time saving features, Multiple sensor testing, Software, Modern design, Compliant with the latest regulations.
One model is ideal for the validation of Washer Disinfectors, Steam Sterilisers and Autoclaves. In place of a removable insert it has a fixed block with pockets for a reference probe and the type of test sensor commonly used in validation applications.
|Range at 20°C||-35 to 140°C (1)||-35 to 140°C||30 to 350°C||35 to 650°C|
|Stability||0.02°C||0.02°C||0.03°C||0.03 to 0.05°C|
|Accuracy – basic||±0.2°C||±0.02°C||±0.3°C||±1°C (500°C) ±2°C (650°C)|
|Accuracy – complete (2)||±0.15°C||±0.15°C||±0.2°C||±0.5°C|
|Heating Time||-30 to +140°C in 15 minutes||-30 to +140°C in 15 minutes||50 to 350°C in 15 minutes||50 to 650°C in 15 minutes|
|Cooling Time||+140 to 0°C in 15 minutes||+140 to 0°C in 15 minutes||350 to 100°C in 40 minutes||650 to 300°C in 20 minutes|
|Calibration Capacity||145mm depth 8Ø, 6.5Ø, 3 x 4.5Ø||148mm depth 25mmØ||148mm depth 25mm Ø||148mm depth 25mm Ø|
|4-20mA Input||Complete Models||Complete Models||Complete Models||Complete Models|
|Ramps and Dwells||Yes with Software||Yes with Software||Yes with Software||Yes with Software|
|Dimensions||228 x 248 x 143mm||228 x 248 x 143mm||228 x 248 x 143mm||228 x 248 x 143mm|